How to use OK.ru onMandarin IM on Nokia s40 (other cell phones)

How to use OK.ru on

Mandarin IM on Nokia s40 (other cell phones)

Mandarín IM 

is an open source client created by Igor Solkin

that provides the use of jabber / xmpp and previously provided other services such as #ICQ # Mail.Ru not more than 3 years ago it was used until mail.ru 2018 icq was closed in 2017.

Only a few message protocols via XMPP (unofficial Jabber exist) on these clients ... Even if it is present on some clients as in the case of odnoklassniki, the well-known Russian social network in so-called domain name ok.ru 

That is why many users sit there chatting.

Thanks to a vk.com user "Сергей Нечипоренко",

We learned that the official ok.ru jabber protocol continues to work today.

How to log in with ok.ru? First to use it in jabber you have to create an account.

Create an account at: https://m.ok.ru/dk?st.cmd=newRegEnterPhone&_prevCmd=selectRegCountry

Once the account is done, download the Mandarin client from here: 

https://vk.com/doc-183584809_545950477

Enter mandarin im and put your id numeral in the first blank field:

(you can find this on:

https://OK.ru/settings)

identification number

Followed by @ and link to the xmpp protocol from OK.ru

Xxxxxxxx@odnoklassniki.ru

Your same OK.ru password

Host: xmpp.odnoklassniki.ru

Always active port: 5222

No SSL encryption.

"mandarin im":

On this client it connects fine and its disconnect is reconnectable.

Contacts look fine and are not deleted.

The messages once read and exited from the application are not read when entering the application again:

This normally happens once the outgoing message has been read and re-entered into the application.

(can be solved in Mandarin im archiving the messages)

(No input required by checking "plain text" unless bombus is required if you try to use it and without @)

How to download nokia firmwares in nokiafirmware.net

Today we are going to explain how to download the firmware that lately has not been downloaded or in a frenzy ... And if you need the firmware from nokiafirmware.net

(THIS WILL BE A TEMPORARY TERM SOLUTION, BECAUSE I CALCULATE THAT IN A FEW MONTHS THE PAGE WILL EXPIRE AND IT WILL NO LONGER WORK BECAUSE THE DISCHARGE WHEEL ROTATES IN FULL DEAD TIME AND FOR NOBODY ALREADY DOWNLOADS ... SO WHILE YOU CAN TAKE ADVANTAGE OF THE BULLET)

As we see the internet every day is more limited, little basic and more expensive hosting ... But sometimes like some things there is a next solution before hanging ... to the problem.

The first is the first ...

 Here they pass a link that is a link generator like the premium links "lech" but to download from certain pages they serve and what they do is that, generate the direct download links.

1) Download opera mod 4.2 for what?

To prevent a virus from being downloaded to the pc or android because of adfly, some people use adfly to earn money ...

Link:

ENGLISH:

https://vk.com/doc334288395_586204134

RU:

https://vk.com/doc334288395_588304712

(Is Java)

OR ANY BROWSER THAT IS COMPRESSING PAGES OR  OLD.

2) After downloading go to google and search:

Nokia "nokia model" RM and separate firmware number nokiafirmware.net

Example:

Nokia asha 302 RM 509 nokiafirmware.net

(Then copy the link from the search address bar on the left)

3) Go to this link:

http://cellomania.com/ffu/

and paste in the search bar the "ID" number of the link only that comes in the link.

Example: https://www.nokiafirmware.net/productcode/0599255.html

"0599255"

(Each link has a number)

You can also look for the product codes in

nokioteca.net

Well, the number of the link that you copied paste in the space bar of that page.

 

and click in: 

[OK]

 The page generate all the download links from nokiafirmware.net. 

4) Choose a link from the list you were looking for.

5) now comes the problem is that you will have to skip some adfly links "THAT'S WHY THE OLD BROWSER !!"

6) Click up not down as seen in the screenshot...

 Then 2 more times until "SKIP AD" appears

press there again.

IF YOU MADE HERE ... I CONGRATULATE YOU ... YOU ARE BRAVE AND DID NOT ASK FOR HELP ... YOU HAVE MADE IT

7)

You should have already got the direct download link for the file.

You go down to the right

Save > download

menu > download (form file for 1GB is given like this the others do not, no idea why)

or the link form 2 to copy info (and copy the link if the file will be larger than the cell phone)

Hold down the link for a moment

 

Copy

1 of 2.

if not, download in the same terminal if you have space left

COMPLETE LIST OF CODES FOR NOKIA (RESULTS VARY DEPENDING ON THE CELL PHONE MODEL)

*#06# to check the IMEI (international identity of the mobile device).

*#7780# return to factory settings.

*#67705646# This clears the LCD screen (operator logo).

*#0000# To view the software version.

*#2820# Bluetooth device address.

*#746025625# Sim clock allows status.

#pw+1234567890+1# Shows if they just have restrictions.

*#92702689# - takes you to a secret menu where you can find some of the information below:

1. Show the serial number.

2. Shows the month and year of manufacture

3. Shows (if any) the date the phone was purchased (MMYY)

4. Show last repair date - if found (0000)

5. Show phone timer life (time elapsed since last start)

*#3370# - Full codec rate increase (FIR) from activation.

Increase signal strength, better signal reception. It also helps if u want to use the GPRS service and it is not responding or too slow. Phone battery will drain faster though.

*#3370* - (EFR) off. Phone will restart automatically.

Increase battery life by 30% receive less phone because the network signal.

*#4720# - Average Activation Codec Rate.

*#4720* - Average Rate Codec deactivation. The phone will restart automatically.

If you have forgotten the wallet code for the Nokia S60 phone, use this reset code: *#7370925538#

Please note, your data in the wallet will be erased. The Phone will ask for the lock code.

Default lock code is: 12345

Press *#3925538# to remove the content and the wallet code.

Unlock the service provider: Insert the SIM card, turn the phone and press until vol (arrows) for 3 seconds, it should say pin code. Press C, then press *flash message, press * again and 04 pins * * * pins pins #*#7328748263373738# resets security code.

Default security code is 12345

Change closed group (Settings> Security settings> user groups) to 00000 and your phone will sound the message tone when you are near a radar speed trap.

Installation of 500 will make the phone 2 sets off security alarms on shopping trips, in practice gr8 jokes! (It works with some of the Nokia phones.) Press the "0" key on the main screen to open the wap browser.

Feature Code

*3370# Activate Enhanced Full Vote Codec (EFR) - The phone uses the best sound quality, but my talking time is reduced by approx. 5%

#3370# Disable Enhanced Full Vote Codec (EFR)

*#4720# Enable Average Codec Rate - The phone uses lower quality sound but should gain approximately 30% more talk time

*#4720# Disable Average Codec Rate

#pw+1234567890+1# provider lock status. (use the "*" to get the "p, w" and "+" symbols)

#pw+1234567890+2# network lock status. (use the "*" to get the "p, w" and "+" symbols)

#pw+1234567890+3# country lock status. (use the "*" to get the "p, w" and "+" symbols)

#pw+1234567890+4# 

SIM card lock status. (use the "*" to get the "p, w" and "+" symbols)

12345 This is the default security code

*#21# Allows you to check the number that "All calls are forwarded to

*#30# Allows view private number

*#43# Allows you to check the "call waiting" of your phone.

*#61# Allows you to check the number that "No Answer" calls are forwarded to

*#62# Allows you to check the number that " Diversion If inaccessible (no service) "calls are diverted to

*#67# Allows you to check the number that" Busy Request "is diverted to

*#0000# Shows the software version of your phones, 1st Line: Software version , 2nd Line: Software Release date, 3rd line: Compression type

*#9999# software version yes Phones *#0000# does not work

*#06# To verify the international identity of the mobile device (IMEI Number)

*#67705646# Removes the operator logo on 3310 and 3330

*#73# Reset phone game timers and results

*#746025625# Shows the status of the SIM clock, if your phone supports this power saving function "SIM Clock Stop allowed", it means that the best possible time is expected

*#94870345123456789# Deactivate the PWM-MEM

hold down the # key Allows you to switch between the lines

*#7760# Manufacturers code

*#7780# Restore factory settings

*#8110# software version for Nokia 8110

*#92702689# Displays - 1.Serial Number, 2.Date done, 3 .Purchase Date, 4.Date of last repair (0000 without repairs), 5.Transfer of user data. To exit this mode it is necessary to turn the phone off and again

**21* number # Activate "All calls" to divert the phone number

**61* number # Activate "No answer" to divert the number phone number entered

**67* number # Activate "The Busy" to divert the entered phone number

The Nokia secret codes

The complete guide

Here is a list of codes on Nokia mobile phones. This list does not include codes that are made at the request of the network.

To use these codes, just dial the numbers as normal.

Code Description

*#06# Shows IMEI (GSM standard)

*#0000# Shows firmware version and date (with information about S40 variant second edition or later)

*#9990# says "Bluetooth Test Mode" in the Symbian models, accept without any messages and Bluetooth behaves abnormally are not Symbian (models with build-in Bluetooth radio, activate first to use)

*##bta0 Show Bluetooth MAC address (models with build-in Bluetooth radio, activate first to show address)

*##mac0w lanShow WLAN MAC address (models with build-in Wi-fi radio)

*##opr0logo Clear carrier logo (3310 and 3330 only)

*##pca0 Enable GPRS PCCCH support (early GPRS models)

*##pcd0 Disable GPRS PCCCH support (early GPRS models)

*##res0wallet Reset mobile wallet (with mobile wallet models)

*##res0 Soft-format memory (Symbian models only)

*##rst0 Restore factory defaults, requires confirmation (DCT4 or later)

*##sim0clock Show SIM clock status (DCT3 only)

*##ssn0 Show manufacturing serial number (mid-range and premium DCT3, basically all DCT4 and BB5 not Symbian models)

*##war0anty Show manufacturing and repair information (no output from DCT3) or total talk time on

Symbian models

* efr0 # Enable EFR encoding (pre-2003 models)

# # efr0 Disable EFR coding (pre-2003 models)

* hra0 # Enable HR coding (pre-2003 models)

# # hra0 Disable HR coding (pre-2003 models)

# pw +1234567890 + n # Show lock status SIM: (pre-2003 models)

n = 1: lock provider

n = 2: network,

n = 3: lock country

n = 4: SIM lock

n # n = 1 .. 999: remember number stored in SIM card location n (DCT3, DCT4, BB5 models)

These codes work on most of

Nokia Mobile Phones to activate / deactivate hidden advanced functions that cannot be changed through the phone menu

A useful function that all of Nokia have owned me is "Show cell info" which can normally be found on phones " Display settings "(for example: on a Nokia 1600) or" Phone settings "(for example: on a Nokia 3315)

If supported by the network, when" Show cell info "is enabled, the name of the phone

will be displayed. the base station of your mobile phone is connected to the display. for example: when I am walking around the city it says "Sydney CBD", and when I am at home it shows the name of my neighborhood.

Note:

To display "p" press "*" three times in one second, to display "w" press "*" four times in one second, to display "+" press "*" twice in less than a second

Code Function

* 3370 # / # 3370 # Enable / Disable enhanced full Rate Codec (EFR) - your phone uses the best sound quality but talk time is reduced my approx. 5%

* # 4720 # / * # 4720 # Enable / Disable Average Codec Rate - Phone uses lower quality sound but should gain about 30% more talk time

* # 7220 # / * # 7230 # enable / disable Support PCCCPH (faster GPRS)

# pw +1234567890 +1 # provider lock status. (use the "*" to get the "p, w" and "+" symbols)

# pw +1234567890 +2 # network lock status. (use the "*" to get the "p, w" and "+" symbols)

# pw +1234567890 +3 # country lock status. (use the "*" to get the "p, w" and "+" symbols)

# pw +1234567890 +4 # SIM card lock status. (use the "*" to get the "p, w" and "+" symbols)

12345 This is the default security code

* # 0000 # Shows the software version of your phones, 1st Line: Software version, 2nd Line: Software Release date, 3rd line: Compression type

* # 9999 # software version if on Phones * # 0000 # does not work

* # 06 # To verify the international identity of the mobile device (IMEI Number)

* # 67705646 # Remove the operator logo on 3310 and 3330

*#73# Reset phone game timers and results

*#746025625# Show SIM clock status, if your phone supports this power saving function "SIM Clock Stop allowed", means that the best possible time is expected

press and hold the #key Allows you to switch between the lines

*#7760# Manufacturers code

*#7780# Restore factory settings

*#8110# software version for the Nokia 8110

*#92702689# Displays - 1.Serial Number, 2.Date Done, 3.Purchase Date ha, 4.Date of last repair (0000 without repairs), 5.Transfer of user data.

To exit this mode it is necessary to turn the phone off and on again.

NEW

To restore the Nokia 5800 XpressMusic to its factory state you can use the following key combination:

* Normal Reset (Soft Reset): * # 7780 #

Restore the files. ini from ROM but does not erase data (photos, videos, documents) or third-party applications.

* Complete reset (Hard Reset): 

*#7370#

Format / reset partition C: and erase ALL data including memory card. The basic system will be restored from ROM.

FILE UPLOADS ON PROXY SOCKS 5 THROUGH XMPP

Hello friends. Welcome to the 2 part of file uploads to jabber. And I think this part will be the last.

For the second part of

« FILE UPLOADS ON PROXY SOCKS 5 THROUGH XMPP »

In the second part we are going to find in the screenshots that the location was definitely the wrong one, now in the correct way that I will explain they will upload the files and if the client will read the directory and files (but as long as it is only uploaded by the transport created for this through bombusmod if you know of another client who uploads files I would like to know

down in blogger comments).

1) Download Bombusmod from this link:

https://vk.com/doc-183584809_572258503

(if it works in another client, do not hesitate to let us know)

2) Register in a transport compatible with upload to cloud that has this capacity with the file upload,

 you can use the jabbim transport: disk.jabbim.cz (which has a file upload space of 101MB)

And disk.moobi.jabbercity.ru which has a 200GB file upload.

The union to transport is the same as when you join a common transport.

How do I join?

Follow the explanation with the screenshots.

menu

> tools> 

service discovery>

menu

server > 

Open the blank menu and write one of the 2 transports to upload to the cloud:

1) disk.jabbim.cz

2) disk.moobi.jabbercity.ru

Followed by "OK" key.

register>

> "check the square box"> "send"

 (After this in the main menu of your jabber account 3 folders will be created)

* public

* album and

* private

 to use, each of the folders that are different paths to the cloud disk on the jabber server that keep the range of private, public or common album folder),

3) finally (YOU ENTER INTO OF THE  TRANSPORT) you give for each one menu> authorize

 and thus authorize the 3 folders to upload files each one separately)

4) You for upload files It is not necessary to create a folder but if you want you can ...

 How create a folder in one of the 3 albums? 

before uploading a file first:

To create folder use in one of the 3 album first to upload a file enter:

MKDIR ➡ MKDIR (folder name)

Example:

"mkdir album"

(The name you want to give it to the album) you remember that each album has the privacy range name set so you know where to put your files, if in private public or album) 

I'll go on to explain ..

How to upload files?

5) Once the folder has been created within the same transport, you will:

menu> contact >

Send file>

 select file> (you choose the "file" to load)

and finish uploading the file by clicking "OK" 

and it will start uploading to the jabber transport server. 

When the file you chose is finished uploading, the same transport will give you a direct upload link which you can share with your friends. 

How to copy the link of the file to send to a friend in jabber?

(If something else comes out, I'll share it here)

The other commands:

For

Available commands: get, cd, help, intro, hash, rm, du, mkdir, lang, pwd, ls, link, send, mv

For you to take into account what they are used for:

GET ➡ GET (folder name) to load the file, with this it opens the directory path)

Example: "get album"

HELP ➡ command help (help followed by command name to get information for each command)

Example: "help get"

RM ➡ RM (followed by the folder name) is used to delete a folder.

Example:

"RM album"

 ls ➡ know the folder information

Example: "ls album"

 LINK➡ make a file link visible

Example: "link https://disk.moobi.jabbercity.ru/titominue@jabber.ru/megaxlr.jpg"

SEND ➡ SEND JID @ JABBER DOMAIN (ALBUM NAME) To send the file to another user.

Example:

"Send titominue@jabber.ru

 album"

THANK YOU FOR READING THE ARTICLE

How to connect vk via jabber

Welcome to another jabber tutorial.

(With this we end with the transports)

In this edition we explain how to connect to vk by jabber.

This transport is open source and safe to use, belonging to the developer Dlia,

Contact:

https://vk.com/id426807227

Group in vk:

https://vk.com/club58881104

If you already have a jabber account that's fine. And if you cannot make an account in the service:

* Jabber.ru

the question is that you connect to your Nokia s40 /works the same for nokia with Symbian OS

 already has integrated "service discovery" 

(That will be used to search for the transports within the client that you choose with this option) 

 if not,as service discovery you can use the

Service

 "pidgin" program on the pc download here:

https://www.pidgin.im/install

And...

You can also use 

Prosody on your pc,download here:

https://prosody.im/download/

and remember not to have 2 sessions opening of jabber at the same time.

clients that support service discovery:

- lampiro

https://vk.com/wall-183584809_445

- talkonaut (symbian / java)

http://www.talkonaut.com/app/

(When you log in with your jabber account, it usually asks for a cell phone number, if it asks for it, you just put the country code and without number ending)

- bombus MOD (java)

https://vk.com/doc-183584809_572258503

Bombus zlib (java):

https://www.jabbim.com/support-download.html

Now just choose a client and log into your jabber account through 

I always recommend: "bombusmod" because have here "service discovery"

 and you must also have your vk.com account logged in.

Then go to bombus mod and you go to the "menu" (at the bottom left)

You go to "tools"

Then to "service discovery"

Again click on "menu" (in the lower left) 

> "server"

You open the box

And you write: vk.opiums.eu (which would be the transport to connect to vk) followed by the "ok" key at the bottom left.

Here the registry will open. You hit "register"

And you copy that link. From the first box (it is the one that will generate the token)

Now you exit bombusmod and go to operate mini or another browser where you are logged in with VK.com and paste the link in the search bar of the browser to generate the login token

Copy the generated token

Now go to bombus mod and look for the transport again. In the second box put your cell phone number without + code

In the third box copy the token and uncheck the square box above (it does not have to be checked. Then you hit the "send" key at the bottom left

And the beginning will begin

You go to the transport inside

And you give in "menu" to the bottom left> authorize

And finally, I invite you to visit @symnok posts on 

symbigram.com

(All about tutorials for symbian os)

Email: symbigram@gmail.com

Telegram: @symnok

VK/VKontakte: @symnok